Mit-ivy ინდუსტრიის ლითონის მოწინავე აკრილის ლატექსის დალუქვის პრაიმერი შესანიშნავი გამჭოლი ძალით






განაცხადი
მას აქვს შესანიშნავი მიჯაჭვულობა ფოლადის სუბსტრატებთან და მსგავსი წყალზე დაფუძნებული პრაიმერები და შესანიშნავი ფიზიკური და მექანიკური თვისებები საღებავის ტალღის გაშრობის შემდეგ.
5. საღებავის ფილმს აქვს მშრალი შუქის შესანიშნავი დაცვა და ფერის შენარჩუნება.
რეკომენდებული პროგრამა იგი განკუთვნილია სატვირთო მანქანების, მანქანების ნაწილების, მსუბუქი სამრეწველო მოწყობილობების და ა.შ. სადრენაჟე დაცვისათვის, სადაც საჭიროა მაღალი დაცვა.
ტექნიკური მონაცემები ფერის ასორტი
მშრალი ზედაპირით (50% შერევით) 15 ℃ C <1 სთ ; 25'C <0.5 სთ
მყარი მშრალი (50% ტენიანობა) 15'C <48 სთ; 25 ° C <24 სთ
ჰიტები "კგ.სმ" 50
წყალი (50 ± 5μm) 72 სთ საღებავი ფილმი არ ბუშტავს, არ ეხმარება ვარდნას, არ ჟანგით.
სიხისტე 0.3 (ორმაგი pendulum) მექანიკური თვისება ფილმის სისქე (23 ± 3 ჯმ)
ადჰეზიის (ჰეგელიანური) დონე 1
ზედაპირის დამუშავება დაფარული მასალის ზედაპირი არ უნდა ჰქონდეს ტენიანობა, ზეთი, მჟავა ნახშირბადი და ნაცარი.






სწრაფი დეტალები
ფოლადი ოქსიდის კანით: გასროლის აფეთქების ან ქვიშის აფეთქების მეთოდები, როგორიცაა დამუშავება Sa2.5 დონემდე, სადაც ქვიშის აფეთქება შეუძლებელია უნდა გაკეთდეს მექანიკურად გაპრიალებული ან
ქიმიურად დამუშავებულია ყველა მცურავი გატეხილი მხრის მოსაშორებლად.
ფოლადი ოქსიდის კანის გარეშე: ქვიშაქვით (დარტყმული) Sa2.5– მდე ან ჰაერის გააქტიურებული, ელექტრო სახეხი ხელსაწყოებით St3– მდე.
დამწვარი თაღის უბნების შედუღება, ალის ჭრის ან ფეიერვერკის შესწორება: დაფქვა St3 დონემდე.
საბაზისო მასალა ძველი საღებავით ფილით: მოაცილეთ ფხვიერი ძველი საღებავის ნაწილაკები და ჟანგი და ქვიშა St3– ზე ჰაერის ან ელექტროსაფრქვევი საშუალებებით.
ტიპაჟის ტიპიური შეფუთვა შეიძლება გამოყენებულ იქნას H902 წყლის დაფუძნებულ პრაიმერთან, ან გამოყენებულ იქნას ცალკე, როგორც ზოგადი დეკორატიული ზედა ფენა, ან გამოყენებული იქნას სხვა ტიპის პრაიმერის პროდუქტებთან ერთად (საჭიროა შემოწმება შესატყვისი).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.


Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
Vehicle Type | 100% Acrylic Latex | |
COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
Volume Solids | 31.8% | |
Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
Dries By | Evaporation, Coalescence | |
Viscosity | 99 ± 2 KU | |
Gloss / Sheen | Flat (5-10 @ 85°) |
Shipping time by Sea (Just for reference) | ||||||||
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days |



FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.







